SINGLE DOOR

SMALLEST – 300MM (incl compensator)

LARGEST – 1000MM (incl compensator)

SMALLEST IN AN ALCOVE – 700MM (incl compensator and magnetic strip)

LARGEST IN AN ALCOVE – 1000MM (incl compensator and magnetic strip)

SMALLEST IN AN ALCOVE SMOOTH FINISH – 300MM (incl compensator and smooth end)

LARGEST IN AN ALCOVE SMOOTH FINISH – 1000mm (incl compensator and smooth end)

• Single door can only be made to swing one way (if need to swing both ways will need bifold door)

 

SINGLE BIFOLD DOOR

SMALLEST – 580MM (incl compensator)

LARGEST – 1500MM (BUT VERY HEAVY – PLEASE ADVISE CUSTOMER) (incl compensator)

SMALLEST IN AN ALCOVE – 700MM (incl compensator and magnetic strip)

LARGEST IN AN ALCOVE – 1500MM (incl compensator and magnetic strip) (BUT VERY HEAVY – PLEASE ADVISE CUSTOMER)

SMALLEST IN AN ALCOVE SMOOTH FINISH – 580mm (incl compensator and smooth end)

LARGEST IN AN ALCOVE SMOOTH FINISH – 1500mm (incl compensator and smooth end)

• Bi-Fold and Tri-Fold full door sets do not come in full height due to possible end users/fitters trapping fingers in the doors

 

DOUBLE BIFOLD DOORS

SMALLEST – 1160MM INLINE (incl compensators)

LARGEST – 2000MM INLINE (incl compensators)

• Bi-Fold and Tri-Fold full door sets do not come in full height due to possible end users/fitters trapping fingers in the doors

BI PART DOORS

SMALLEST – 720MM (incl compensators)

LARGEST – 1500MM (incl compensators)

• Up to 1870mm in height on Full Height door sets Bi-Part only (the compensator will be higher to take the R+F comp hinge caps)

 

FIXED PANEL

SMALLEST – 300MM (incl compensator and post)

LARGEST – 1000MM (incl compensator and post (BUT CAN MAKE BIGGER FIXED PANELS BUT NEED TO ADVISE CUSTOMER THERE WILL BE AN EXTRA VERTICAL POST IN THE MIDDLE AND THE POST WILL NEED A TDSK01 TO GO TO THE CEILING)

HEIGHTS

BIFOLD DOORS – ANY HEIGHT UPTO APPROX 1000MM HIGH

SINGLE DOORS – ANY HEIGHT UPTO 1880MM HIGH

FIXED PANELS – ANY HEIGHT UPTO 1880MM HIGH

(WE CAN DO ALMOST ANY HEIGHT SCREEN – BUT NO HIGHER THAN 1880MM HIGH)

 

MADE TO MEASURE SLIDING DOORS

WE CAN MAKE MADE TO MEASURE SLIDING DOORS, BUT WE CAN ONLY MAKE THE SAME CONFIGURATION WE CURRENTLY MAKE IN THE CATALOGUE

OPTION SE

OPTION SJ

OPTION SM

OPTION SN

OPTION SU

OPTION SX

OPTION SY

**** We can’t do Black Cap Sliding doors

 

TRIFOLDS DOORS

SMALLEST IN AN ALCOVE – 900MM (incl compensator and magnetic strip)

LARGEST IN AN ALCOVE – 1300MM (incl compensator and magnetic strip)

CAN DO TRIFOLDS TO GO ROUND THE CORNER

• Bi-Fold and Tri-Fold full door sets do not come in full height due to possible end users/fitters trapping fingers in the doors

 

STANDALONES

• 2000mm high screens are the current range of standalones, but again the doors are again only 1870mm

 

HALF HEIGHT POSTS WITH SOAP DISH BRACKET

• Fixed panels have a minimum size of 300mm when a half height post & soap dish bracket are attached. Minimum height of 750mm

07-002-735

Panel Bracket Assembly

 

DOORS CLOSING DIRECT TO A WALL – AVAILABLE IN STANDARD AND SILVERDALE

• If a door is required to close directly onto a wall (e.g., in an alcove) and not onto another panel/door we can do this, but you will need to put in additional requirements “magnet wall compensator” as this will allow customer to attach a special comp to the wall that the door can close to